BACK
Get Technical Downloads

MECHANICALLY FIXED INSULATED

CONCRETE ROOF SYSTEM

SYSTEM OVERVIEW

The Fatra insulated roof system has been specifically engineered by Fatra to create a non-penetrative mechanically fixed insulated roof system. This system provides the client with superior thermal efficiency, reduced installation programmes, reduced material costs and can reduce air conditioning costs by up to 25% per annum. The Fatra insulated roof system drastically improves the overall thermal rating by up to 20% due to minimising the amount of thermal bridges compared to installing the insulation to the underside of the substrate. All joints, laps and terminations are hot air fusion welded creating a permanent and physical bond and does not rely on adhesives sealants or tapes to create a waterproofed joint.

Unlike traditional inverted membrane systems where the membrane is installed below the installation which requires a ballast to weigh the insulation down, the Fatra insulated system removes the requirement for the pebble ballast which completely obscures the membrane making any rectification or refurbishment extensive and very costly as well as adding a substantial amount of additional and unnecessary weight to the structure itself.

FATRAFOL 810v | Reinforced PVC Waterproofing Sheet Membrane

The Fatrafol 810v polyester reinforced membrane is fully bonded to the Fatra PVC pads using Fatrabond pad adhesive. The adhesive bond achieves a 6.4kn uplift strength between the membrane and fixing system.

PIR | Insulation Board

The PIR insulation board is installed over the FatraPar to fully insulate the roof structure. Depending on the R Value requirements various thicknesses of insulation are available.

FATRAPAR | Vapour Control Layer

The Fatrapar vapour control layer is laid over the substrate and is sealed along all laps, joints, penetrations and upturns using double sided butyl tape to prevent moisture ingress.

DOWNLOADS

GET ALL FILES IN EMAIL

WORD SPEC
Specification word template to simply insert into your project documentation.
Insert into project docs
Tailor to requirements
CAD DETAILS
DWG detailed section drawings for all associated system detailing.
Tailor to requirements
Branding capability
2D DRAWINGS
Cross section drawings for all associated system detailing.
Precise system detailing
Compact design
INSTALL GUIDE
Provides a step by step guide on how the system comes together
3d steps guide
Compact design
TECH DATA SHEETS
All the technical data & MSDS documentation.
System specific TDS
TDS for every component
MAINTENANCE
Provides full guidance on how to maintain the Fatra system.
Maximise system life span
Includes maintenance log
3D TECH SPEC
3D images with full methodology of the system.
3D installation manual
Customise to any project
CERTIFICATION
All certification, accreditations & test results for the Fatra system.
Performance transparency
System specific
Download

WHATS NEXT?